Tweaks are meant for experimental purpose and might often change so we allow the interface to contain any option to avoid possible type checking failures.
Optional adaptation_Groups adaptation sets and switches between them based on their group attribute instead of the recommended
SupplementalProperty urn:mpeg:dash:adaptation-set-switching:2016. Default is false.
8.1
Optional check_If set, the player checks all available DRM licenses when the key status for a KID updates.
Instead of surfacing an error once the KID becomes unusable on a license, the key status for the KID is checked across all licenses. Only if the KID is not usable on any of the licenses an error is thrown.
Default is true.
v8.140.2, v8.144.0
Optional chunked_When set, the player will use the fetch API to download segments using HTTP chunked transfer encoding (CTE)
instead of the XMLHttpRequest API.
In combination with chunked CMAF content this can be used to achieve low-latency streaming.
Optional disable_If a specific [[HttpRequestType]] has one or more HTTP status codes associated with it via this configuration value, requests of that type will not be retried if they return one of the associated status codes.
8.4
Example:
disable_retry_for_response_status: {
[HttpRequestType.MANIFEST_DASH]: [ 401 ]
}
Optional dword_If set, all BaseMediaDecodeTime-stamps will be truncated to 32 bits in length.
Optional enable_Specifies whether seek is allowed for live streams. By default this is not allowed.
Optional fairplay_If set, keyerror events will be ignored for Fairplay when more than one needkey event was triggered with
identical initData.
8.18.0
Optional force_If set, every BaseMediaDecodeTime in data segments will be rewritten, regardless if they exceed 32 bits or not. The tizen or webOS module has to be present and the player should run on Tizen or webOS TV.
Using this tweak might cause some unwanted problems when content has short discontinuities (e.g. SSAI streams). Enabling the tweak is only recommended when the playback experience is improved on testing.
Optional force_If set, software decryption is used over the browser's WebCrypto API for anything that the player manually decrypts. E.g. for decrypting segments of DASH ClearKey-protected and HLS AES-128-encrypted streams.
Note: Proper DRM-protection such as Widevine and PlayReady is not affected by this tweak as decryption of such must be handled by the browser's CDM.
Optional hls_All HLS variants with a bitrate lower than the given bitrate in bits per second (bps) are considered audio-only variants and removed if there is at least one with a higher bitrate.
Optional hls_Defines the duration in seconds after which the backup stream penalization is considered to be expired. The penalty is applied when a playlist, or one of its segments, has failed to load, and the player has triggerd failover to a backup stream.
Default is 30 seconds.
Optional hls_When set, the SourceBuffers will be cleared between segments with different discontinuities that otherwise have matching properties. This tweak can be used to switch this behaviour off for certain streams to gain more performance and seamless playback between discontinuity boundaries.
Default is true.
v8.93.0
Optional hls_When set, the player will parse the manifest in a worker thread. This can improve the performance of the player when the manifest is large.
Default is false.
Optional hls_Whether the native player used for HLS on Safari should subscribe to cuechange events from the metadata TextTrack
and relay ID3 events as Metadata events.
Note: This tweak has no effect if the MSE-based player (i.e. Html5) is used.
Default is true.
v8.158.0
Optional hls_When set, the playback times of the segments between HLS playlist are synced using media sequence number during quality switch.
Default is false.
Optional ignore_If enabled, Edit (edts) boxes in MP4 segments which would introduce a segment start time offset are filtered from
segments before forwarding them to the decoder. This is required as browsers are handling such boxes differently.
This flag ensures consistent cross-browser behavior in this matter and is enabled by default.
8.3
Optional impressionSets the impression server to the given URL if allowlisted. Default is the bitmovin impression server URL.
Optional licenseSets the license server to the given URL if allowlisted. Default is the bitmovin license server URL.
Optional live_The number of segments at the start of the segment list that the player considers unsafe to request. E.g when set to 2 the earliest possible segment to seek/timeShift to would be the third segment in the list. The default value is 0, so the complete DVR window is used.
Optional log_Sets the LOG_LEVEL of the player by calling setLogLevel.
Optional max_Changes the maximum buffer level in seconds. Default is 40 seconds.
For live streams the lowest value of playlist duration for HLS, timeShiftBufferDepth for DASH and
the max_buffer_level is used as a maximum value for the buffer.
Use forwardduration instead.
Optional max_The number of retries per CDN if a download error occurred in VoD streams By default the player will retry 2 times.
Optional max_Amount of times to retry a failed MPD download before throwing an error for failed download. By default the player will retry 2 times.
Optional max_Maximum number of retries when network request fails for the provided manifest. Applies for both master and variant playlist in case of Hls.
Default value is 2.
Optional min_Gaps in content that are smaller than this value will not be skipped. This tweak should be used if gap skipping is unnecessary: some browsers are able to play through small gaps in content without getting stuck.
Default value is 0, which means that all encountered gaps will be skipped.
Optional mpd_The time in seconds to wait before trying to download the MPD again after a download error occurred. By default the player will retry in half a second
Optional mpd_The time in seconds that the MPD age for live streams may exceed the minimumUpdatePeriod, before it should be considered outdated. By default the player will use 5 seconds.
Optional native_If enabled the native player used for HLS in Safari would fetch and parse the HLS playlist and trigger
an Error event if the download of a segment fails and the playback stalls. Default is false.
Optional native_If enabled the native player used for HLS in Safari would fetch and parse the HLS playlist and trigger
SegmentPlayback events carrying segment-specific metadata like #EXT-X-PROGRAM-DATE-TIME
if present in the manifest. Default is false.
Optional no_Specifies whether the Player should not adjust the target buffer levels after a QuotaExceededError.
8.25.0
Optional parse_When set, CEA-708 captions are parsed when present in the source stream, instead of CEA-608. By default CEA-608 captions are parsed.
Optional parse_Whether the player should parse and process emsg boxes from MP4 segments.
Note: This tweak is limited to the MSE-based player (i.e. if getPlayerType returns Html5) and has no effect for the native player (Native).
Default is true.
v8.98.0
Optional playstation_PlayStation 5 Platform tweaks
Optional preserve_If set to true, the BMDT will preserve possible gaps in segments while rewriting timestamps, which may prevent out of sync audio and video.
Optional prevent_This flag indicates whether we prevent the native video element to preload data. Metadata will always be
preloaded. In case of native HLS playback on Safari, this will cause e.g. AudioTracks not being added, before
the playback starts.
Optional query_Query parameters are added as GET parameters to all request URLs (e.g. manifest, media segments, subtitle files, …). Query_parameters should be an object with key value pairs, where the keys are used as parameter name and the values as parameter values.
Example:
query_parameters : {
key1: 'value1',
key2: 'value2',
mycustomname: 'another-value'
}
The example above would be translated into MY_REQUEST_URL?key1=value1&key2=value2&mycustomname=another-value.
Optional restart_Amount of seconds the player buffers before playback starts again after a stall. Default is 0.9 seconds.
This value is restricted to the maximum value of the buffer minus 0.5 seconds.
Optional resume_Specifies whether live content should resume playback at the playback time before the ad break. This is required
in order to be able to use replaceContentDuration for live streams. By default,
live content resumes at the live edge.
Note: enable_seek_for_live is required if this is set to true.
8.27.0
Optional segment_Makes sure that player initialize period switch and recreate source buffers in case that we are switching from unenctyped to encrypted segments. This fixes the issues with pixelated picture on playready protected HLS stream with unecrypted SSAI in MS Edge.
As of 8.33.0 new buffer handling covers this case by default so it doesn't have any effect.
8.25.1
Optional serviceworker_Defines the scope of the ServiceWorker that is created in the bitmovin-serviceworker-client.js module.
8.13.0
Optional startup_Amount of seconds the player buffers before playback starts. Default is 0.9 seconds.
This value is restricted to the maximum value of the buffer minus 0.5 seconds.
Optional stop_Enabling this flag prevents the player from downloading any further resource (playlist, segments, ...), when the
player is paused. Already issued requests will be finished. Default is false.
Optional wish_Generated using TypeDoc
The tweaks configuration is used as an incubator for experimental features and also contains features implemented for specific customers that might not make it into the officially supported feature set.
Tweaks are not officially supported and are not guaranteed to be stable, i.e. their naming, functionality and API can change at any time within the tweaks or when being promoted to an official feature and moved into its final configuration namespace. Tweaks are often proof-of-concepts that are quickly implemented for urgent needs of customers. They often do not go through an architectural review and are therefore not signed and approved by the architecture team.
Example: